The easiest way, use DVE right-click on the signal, and do “Force Value”, then “Set Force…”, and do the necessary value setup. Some might run the test in ucli, or have the regression to be run automated by using tcl/do file, then you’ll need to know more about the force command construction. You can do a force –help in ucli or DVE command line for the help guide. Simple force value to signal command To set a signal to value 1 force <hierarchy.signal> 1 To set a signal to value 1 at time 10ns force <hierarchy.signal> 1 @10ns To set a signal to value 1 after 10ns from current time force <hierarchy.signal> 1 10ns The above commands are similar to force –freeze, which other activity in the simulation cannot override the value. To counter this, use –deposit in the force command. Force clocking value to a signal To set a clock signal with period 20ns, 60% duty cycle. What the following command will do is, force this signal to 1 at 0ns, then 0 at 12ns...
Previously known as jcrys26's kdb. A learning dump and sharing place.